Adding BLE-2 as Access Point in TimeTec Access

Tuesday, April 07, 2020 TimeTec 0 Comments

TimeTec BLE-2 Control Board functions as an intermediary device between a user’s Mobile App and the Door or Turnstile controller, whereby a user can tap on his/her Mobile Apps, send a voice command, or scan a QR Code to unlock the TimeTec BLE-2 via Bluetooth connection. Users no longer need to carry access cards or other physical access gadgets, this installation uses your smartphone as the ONLY credential powered by the Bluetooth Low Energy (BLE) technology to get encrypted access activities of the Access Point in real-time for high transparency and extra security.

Step 1 - Log onto TimeTec Access, go to the Access Point tab > click Manage Devices > BLE Devices. Click the Add button, then insert BLE-2’s serial number and name of the location. The Serial Number can be retrieved at the back cover of the BLE-2.

Step 2 - Assign added BLE-2 to the Access Point by click on Access Point tab > Manage Access Point > Select Access Point and click on the Add button.

Step 3 - Select Added BLE-2 from the list and click the Save button.

Step 4 - Additionally, you may enable the ‘In and Out status’ function if required. This will require all users of the TimeTec Access mobile app to scan the QR Code (install at Access Point) in order to get access at the Entry or Exit via setup Access Point. You may also acquire the QR Code sticker provided at the BLE-2’s box. Please click on the QR icon to print it otherwise.

Note: If some of the screenshots or steps viewed here are different from the ones in the current system, this is due to our continuous effort to improve our system from time to time. Please notify us at, we will update it as soon as possible.


Have any questions or inquiries about FingerTec? Drop your input here.