Leave Calculator Feature in TimeTec Leave

Friday, May 29, 2020 TimeTec 1 Comments



Introduction
In April, we have released a new feature known as the Leave Calculator. This function is a calculator that helps the Administrator to conduct estimation on the potential leave balances before he/she can apply actual changes to the system. Use the Leave Calculator to perform a leave simulation for the current or next calendar cycle and check which leave policy best suits the selected user(s).

Process
1. First, go to Leave Settings > Leave Calculator


2. To start, select a User and the Calendar Year > Click on “Generate Leave Policy and Service Accrual”.

3.  Once generated, the system will provide the user’s current Leave Policy and Service Accrual Information. You can select a different Leave Policy or Service Accrual to know the leave estimation for the selected user.



4. Click Submit to generate a user balance result.

5. The system will generate the estimated leave balance for each leave type available in the selected Leave Policy. The Admin can then reassign the user into the respective Leave Policy or Service Accrual as necessary.


Important note:
1. The estimation leave balance displayed doesn’t include the taken/used leave and the actual result might be slightly different based on the employee’s latest data.
2. This leave calculator only estimates the leave balance and will not affect the current users’ leave balances. Admin will need to reassign the user to the particular leave policy or service accrual for the changes to take effect.

Note: If some of the screenshots or steps viewed here are different from the ones in the current system, this is due to our continuous effort to improve our system from time to time. Please notify us at info@timeteccloud.com, we will update it as soon as possible.

1 comments:

Have any questions or inquiries about FingerTec? Drop your input here.

How to Add Note in the Roster and Calendar with TimeTec TA Web and Apps

Friday, May 29, 2020 TimeTec 0 Comments



Introduction
Calendar Notes will help keep all of your ideas in one place. Jot down thoughts and ideas to prevent yourself from forgetting any important events. Your notes will be viewable directly on your calendar in the TimeTec TA. You can also pick up directly at your content schedules from right where you left off.

Use Calendar Notes to keep track of all your important dates and deadlines. This is perfect for indicating campaign timelines, meeting dates, holidays, and special events.

Process
(TimeTec Web)
1. Login to TimeTec TA > ROSTER


2. Click on the date and the note.


3. Fill in the note and click save
Max. length of 250 characters


4. Once it is saved, there will be a small green sign appearing on the date, indicating that a note has been saved on the particular date.


TimeTec TA Apps
5. On the TimeTec TA Apps, go to the side menu and click ‘Roster’


6. Press and hold the selected date to add a note.


7. Then, the Add Note will appear as a pop out box. Fill in the note and click ‘Save’ to add.


8. Once the note has been saved, the system will display as shown below. A small grey dot will appear on the date, indicating a note has been added.


Note: If some of the screenshots or steps viewed here are different from the ones in the current system, this is due to our continuous effort to improve our system from time to time. Please notify us at info@i-neighbour.com, we will update it as soon as possible.

0 comments:

Have any questions or inquiries about FingerTec? Drop your input here.

User Guide: TimeTec VMS for Corporates (Multiple Companies)

Thursday, May 28, 2020 TimeTec 0 Comments



In the recent blog post, we have uploaded a guide on how to set up TimeTec VMS for a single company. You can refer to the post here. Today, we will guide you on how to set up TimeTec VMS for Corporates, MULTIPLE COMPANY mode. 

TimeTec VMS for Corporates offers 2 types of account modes: a single company and multiple companies. The single company mode is suitable for the type of building that is owned by a single company, while the multiple companies mode is suitable for an office tower or commercial building which consists of multiple different companies. 

This setup guide for multiple companies covers:


System Role
The table below provides roles and accessible modules involved in TimeTec VMS (Multiple Company Mode). Each role can only access the modules that are marked in green dot under their corresponding column. 

Building & Management Information
Role: Owner/Master Admin/Building Admin (with Accessible Module Rights)
You may view and edit the building and management information at the Office module. Tap on the edit button to complete your building and management's information.

Fill in the required fields. Try to complete as much of the information as possible and pay attention to the accuracy of the information because every report will contain this information. Recheck the information before proceeding.

Blocks & Units
Role: Owner/Master Admin/Building Admin (with Accessible Module Rights)
For multiple company mode, it is essential to create block(s) and unit(s) to illustrate your premise in details as you will need to tie the information of your tenants to the unit(s). This is a proof of occupancy before they can employ the visitor management system.

You can create new blocks and units, add company information to the unit, and view the company listing of the whole premise at the Manage Company Module.

You can add a new block and units by clicking on the Add Block button and fill in the required fields.

To change the numbering of the Unit No., you can amend it from the edit unit no. page. Don't worry, you can always amend this information at Company Listing > BlockName > Edit.

Company Details
Role: Owner/Master Admin/Building Admin (with Accessible Module Rights)
To add companies information one by one, simply go to Company Listing > Block and click on the vacant unit that you would like to add the company's information in.

Just fill in the required fields. You can tie more units onto one company by clicking on the + button and select the corresponding unit(s).

In case you want to add companies in batch, you can use the import feature. The import feature is available at Company Listing > BlockName > Import.

You may import the company listing by following the steps. We recommend you to use our template. You can download the template and fill in the required fields accordingly. Make sure you remove the empty rows to avoid data collision. Save all the changes and go back to the webpage to import. 

As the login credential for the company will be mailed to the saved email address, please make sure that the company's email address is correct. The company owner/office admin will need the login credential to verify their email and create login details for their own accounts before they can login to use TimeTec VMS.


Employee Details
Role: Office Admin
To add a new employee into the system, go to Staff > Staff Listing > Manage. You can choose to add employee one by one or import it by batch via excel file. Make sure to enter the correct email address so that the activation email will be sent correctly.

After adding employees into the system, do not forget to remind the employee to activate their account by following the steps in the activation email. 

You can also create an organization structure at Staff > Organization Structure to group your employees accordingly.

Visitation Rules 
Role: Owner/Master Admin/Building Admin/Company Admin(with Accessible Module Rights)
The visitation rules are customisable at the Setting module. Simply set the visitation rules based on your company’s requirements.

These rules define how the system manages your visitors. You can customise the visitation rules such as the terms for check-in/out and the condition according to your corporate style guide.

Visitor Details 
Role: Owner/Master Admin/Building Admin/Company Admin(with Accessible Module Rights)
Visitors are required to register before they can check-in to the premise. You can determine the visitor's details that your company would like to collect by customizing the visitor's details module. This setting is available at the setting module.

You can customize the registration form by adding up to 3 additional necessary fields. You can even set the field as mandatory or non-mandatory. However,  the translation is not available for the customized fields. 

Nonetheless, please note that the changes will be reflected in the registration form only when the account is synchronized with the latest updates.

Visitor Pass
Role: Owner/Master Admin/Building Admin/Company Admin(with Accessible Module Rights)
Visitor pass is normally issued to the visitor during the check-in process. By using TimeTec VMS, issuing a visitor pass becomes an optional feature as the Visitation Ticket with the QR code is provided during check-in in order to access specific access points within the premise. 

However, if you need the visitor pass feature, you can enable it at the setting module.

Once you enable the visitor pass feature in the TimeTec VMS, the admin or guard can select the pass no. without having to fill it in manually. You can even configure the visitor pass template for printing usage.
Manage IoT 
i-Vizit
Role: Owner/Master Admin/Building Admin/Company Admin (with Accessible Module Rights)
i-Vizit tablet is well-suited to be installed at the attended front desk or guardhouse where the receptionists or guards are able to monitor the status of the visitor and perform the check-in/out process.

To use i-Vizit, first you will need to create a security account so that your receptionist/guard can use it to login to the device. The security account can be created at Setting > Security Account > Add. Please fill in all the required fields. 

After the security account is registered, please share the email address and password you just entered to the receptionist/guards so they can login to the i-Vizit Tablet using this login credential.

i-Comm
Role: Owner/Master Admin/Building Admin/Company Admin (with Accessible Module Rights)
i-Comm tablet is well-suited to be installed at the unattended front desk or lobby where visitors can register for a visit on their own.

To use i-Comm, first, you will need to create an account for the kiosk. The account can be created at Setting > Kiosk > Add. You can edit, remove, and add the kiosk account(s) here. 

After the account is created, you can also customize the i-Comm kiosk accordingly, to suit your company’s requirements. 

QF Master
Role: Owner/Master Admin/Building Admin/Company Admin (with Accessible Module Rights)
QF Master is recommended to be installed at access points where it will allow visitors to perform check-in/out automatically by scanning their face or visitation QR code.

To register a QF Master, first, you will have to retrieve the mobile ID from the QF Master. You can obtain the mobile ID once you turn on the QF Master application. The mobile ID will display on the device if it is not paired to any account.

To add QF Master into the TimeTec VMS system, go to Manage IoT > QF Master and fill up the required fields.

Access Point
Role: Owner/Master Admin/Building Admin/Company Admin (with Accessible Module Rights)
To add an access point in the TimeTec VMS, you will need to first get the TimeTec BLE-2 ready. Get the serial number of the TimeTec BLE-2 on the back of the device. If you do not have it on hand, you can purchase it here

For example, the serial number is 210012345.

Then, go to Manage IoT > Access Point > Add to add new access point(s). 

After an access point is added, you may edit its access permission by clicking on the access permission button. Select the corresponding companies to authorize visitor permits. Only visitors registered under the assigned companies will be granted access permission to pass through this access point.

Note: If some of the screenshots or steps viewed here are different from the ones in the current system, this is due to our continuous effort to improve our system from time to time. Please notify us at info@timeteccloud.com, we will update it as soon as possible.

0 comments:

Have any questions or inquiries about FingerTec? Drop your input here.

User Guide: TimeTec VMS for Corporates (Single Company)

Thursday, May 28, 2020 TimeTec 0 Comments



TimeTec VMS for Corporates offers 2 types of account modes: a single company and multiple companies. The single company mode is suitable for the type of building that is owned by a single company, while the multiple companies account is suitable for an office tower or commercial building which consists of multiple different companies. 

In this article, we will guide you on how to set up TimeTec VMS for a SINGLE COMPANY account. This setup guide covers:


System Role
The table below provides roles and accessible modules involved in TimeTec VMS (Single Company Mode). Each role can only access the modules that are marked in green dot under their corresponding column. 

Building & Management Information
Role: Owner/Master Admin/Company Admin (with Accessible Module Rights)
You may view and edit the building and management information at the Office module. Tap on the edit button to complete your building and management's information.

Fill in the required fields. Try to complete as much of the information as possible and pay attention to the accuracy of the information because every report will contain this information. Recheck the information before proceeding.

Employee Details
Role: Owner/Master Admin/Company Admin (with Accessible Module Rights)
To add a new employee into the system, go to Staff > Staff Listing > Manage. You can choose to add employee one by one or import it by batch via excel file. Make sure to enter the correct email address so that the activation email will be sent correctly.

After adding employees into the system, do not forget to remind the employee to activate their account by following the steps in the activation email. 

You can also create an organization structure at Staff > Organization Structure to group your employees accordingly.

Visitation Rules 
Role: Owner/Master Admin/Building Admin/Company Admin(with Accessible Module Rights)
The visitation rules are customisable at the Setting module. Simply set the visitation rules based on your company’s requirements.

These rules define how the system manages your visitors. You can customise the visitation rules such as the terms for check-in/out and the condition according to your corporate style guide.

Visitor Details 
Role: Owner/Master Admin/Building Admin/Company Admin(with Accessible Module Rights)
Visitors are required to register before they can check-in to the premise. You can determine the visitor's details that your company would like to collect by customizing the visitor's details module. This setting is available at the setting module.

You can customize the registration form by adding up to 3 additional necessary fields. You can even set the field as mandatory or non-mandatory. However,  the translation is not available for the customized fields. 

Nonetheless, please note that the changes will be reflected in the registration form only when the account is synchronized with the latest updates.

Visitor Pass
Role: Owner/Master Admin/Building Admin/Company Admin(with Accessible Module Rights)
Visitor pass is normally issued to the visitor during the check-in process. By using TimeTec VMS, issuing a visitor pass becomes an optional feature as the Visitation Ticket with the QR code is provided during check-in in order to access specific access points within the premise. 

However, if you need the visitor pass feature, you can enable it at the setting module.

Once you enable the visitor pass feature in the TimeTec VMS, the admin or guard can select the pass no. without having to fill it in manually. You can even configure the visitor pass template for printing usage.

Manage IoT 
i-Vizit
Role: Owner/Master Admin/Building Admin/Company Admin (with Accessible Module Rights)
i-Vizit tablet is well-suited to be installed at the attended front desk or guardhouse where the receptionists or guards are able to monitor the status of the visitor and perform the check-in/out process.

To use i-Vizit, first you will need to create a security account so that your receptionist/guard can use it to login to the device. The security account can be created at Setting > Security Account > Add. Please fill in all the required fields. 

After the security account is registered, please share the email address and password you just entered to the receptionist/guards so they can login to the i-Vizit Tablet using this login credential.

i-Comm
Role: Owner/Master Admin/Building Admin/Company Admin (with Accessible Module Rights)
i-Comm tablet is well-suited to be installed at the unattended front desk or lobby where visitors can register for a visit on their own.

To use i-Comm, first, you will need to create an account for the kiosk. The account can be created at Setting > Kiosk > Add. You can edit, remove, and add the kiosk account(s) here. 

After the account is created, you can also customize the i-Comm kiosk accordingly, to suit your company’s requirements. 

QF Master
Role: Owner/Master Admin/Building Admin/Company Admin (with Accessible Module Rights)
QF Master is recommended to be installed at access points where it will allow visitors to perform check-in/out automatically by scanning their face or visitation QR code.

To register a QF Master, first, you will have to retrieve the mobile ID from the QF Master. You can obtain the mobile ID once you turn on the QF Master application. The mobile ID will display on the device if it is not paired to any account.

To add QF Master into the TimeTec VMS system, go to Manage IoT > QF Master and fill up the required fields.

Access Point
Role: Owner/Master Admin/Building Admin/Company Admin (with Accessible Module Rights)
To add an access point in the TimeTec VMS, you will need to first get the TimeTec BLE-2 ready. Get the serial number of the TimeTec BLE-2 on the back of the device. If you do not have it on hand, you can purchase it here

For example, the serial number is 210012345.

Then, go to Manage IoT > Access Point > Add to add new access point(s). 

After an access point is added, you may edit its access permission by clicking on the access permission button. Select the corresponding companies to authorize visitor permits. Only visitors registered under the assigned companies will be granted access permission to pass through this access point.


Note: If some of the screenshots or steps viewed here are different from the ones in the current system, this is due to our continuous effort to improve our system from time to time. Please notify us at info@timeteccloud.com, we will update it as soon as possible.

0 comments:

Have any questions or inquiries about FingerTec? Drop your input here.