FACE ID 5 TD / FTD Wiring for Access Control

Thursday, March 18, 2021 TimeTec 0 Comments

Good news, FingerTec has launched Face ID 5 recently, and the two new models that are equipped with temperature readers are Face ID 5 TD and Face ID 5 FTD that also can be used for building access control.

*Please state in your inquiries before purchasing the Face ID 5 with Access Push to be compatible with our software. This tip will show how the Face ID 5 can function as an access control system for in and out and   pair with our R3c device.


Diagram 1 : Connection of  Face ID 5 with AdapTec Plus & R3c

Diagram 2 : Connection of  Face ID 5 with R3c 

Face ID 5 settings at the device for Access control

Picture 1 : Press Menu Icon

Picture 2 : Select COMM icon

Picture 3 : Select Serial Comm

Picture 4 : Select Serial Port

Picture 5 : Select Master Unit

After setting the Face ID 5 as a Master Unit, the IN and OUT for the device need to be set as to determine either the master will act as the IN device or OUT.

Picture 6: Push menu icon

Picture 7 : Select Access Control

Picture 8: Select the Master device and Slave device for position for ether In or Out

Picture 9 : Master Device select In or Out

Picture 10 : Slave Device select In or Out

Note: If some of the screenshots or steps viewed here are different from the ones in the current system, this is due to our continuous effort to improve our system from time to time. Please notify us at info@fingertec.com, we will update it as soon as possible.


Have any questions or inquiries about FingerTec? Drop your input here.