Keeping Track of Your Terminal's Transaction Memory CapacityAll the FingerTec terminals are equipped with a flash memory to store transaction data, fingerprint templates, face templates, etc. The flash memory is a permanent (non-volatile) storage and it can store data even without the power supply. The FingerTec terminals’ memory capacity varies for each model. Time attendance only terminals have far less transaction storage capacity compared to the multimedia models.
When you perform a successful verification, the terminal will store a transaction log into its memory. The transaction will be stored in the terminal until it is downloaded into our TCMSv2 software, or manually deleted. If you do not download or delete the transaction data after a period of time, the memory’s storage will reach its maximum capacity and the terminal will cease to work or function properly. If you are using a USB flash disk to manage the transaction records, click here for further instructions. If you are only using the FingerTec terminal for door access purposes and do not need the transaction data, it is recommended that you perform a housekeeping to ensure that the terminals to continue to work in a tip top condition.
You can set a reminder at the terminal before its memory reaches the maximum capacity. If the configured figure is 99, the terminal will alert users when it reaches its last 99 transaction storage.
For terminals AC100, TA100, AC900, R2, Kadex : Press Menu > Options > Log Opt > Alm SuperLog / Alm Attlog
Alm SuperLog: to instruct the terminal to alert user if the transaction storage of administrator login is less than the configured figure. The default figure is 99.
Alm AttLog: to instruct the terminal to alert user if the transaction storage is less than the configured figure. The default figure is 99.
For terminals AC100C, TA100C, TA200 Plus, Q2i, I-Kiosk 100, R3, and TA500: Press Menu > System > System > Log Alert
For terminals Face ID 2, Face ID 3: Press Menu > System > Log Setting > Log Alert
For terminal I-kiosk 100 Plus: Press Menu > System > Param Setup > Log Alert
Log Alert: To instruct the terminal to alert user if the transaction storage is less than the configured figure. The default figure is 99.
This comment has been removed by the author.ReplyDelete
I've an urgent problem when deleting a user from the FingerTec terminal...the message content as following :ReplyDelete
"Aim Super Log
Free 0PLOG 91"
It preventing me deleting users...
Thanks in advance
i have deleted log by error from ta200+ terminal can iget back the logReplyDelete
We already reply to you through e-mail. Kindly check your e-mailReplyDelete
I want to delete attendance transacton history(housekeeping).I have tried the steps:menu,system,options,del att but all steps show except when i come to options it does not show del attlogReplyDelete
To delete all attendance log, Press MENU → Option → System → Advance Option → Delete Att log.Delete
In case you not found "Advance Option" Selection .Please log in the MENU as SUPERVISOR, because only SUPERVISOR have authority to delete all attendance log.
selamat sore mesin saya AC900 ketika saya hapus user munculReplyDelete
"Alm Super Log
Free 0PLOG 10"
dan saya hapus user lagi berkurang lagi OPLOG
yg saya tanyakan apa yg terjadi jika Free OPLOG 0 ?
apa bisa di disable log ini ?
terima kasih sebelumnya
Hi Feri Feryadi,Delete
For your information, Alm Superlog is an alert to show you that the data is reaching its full capacity. Hence, please download all the attendance log and user data from the device, then clear all data inside the device. Once finished you need to upload users again to the device to fix the error message. Regards.
how to download all the attendance log and user data from the device and then upload again to device ? manual?ReplyDelete
Hi Feri Feryadi,Delete
For your information, if you want to download the user and upload it back to the device, firstly you can download all the user info from the device to the software (TCMSv2,TCMSv3 or Ingress). After that, you just need to select which terminal that you want to upload the user data and you can upload it back directly from the software to the device.
For the clocking data, normally it will be stored to the software and you can preview and manage it from the softwar
How to fix the No More Space when thumb print...?ReplyDelete
Dear Sir / Ma'am,Delete
Good day to you,
Referring to your inquiry, you need to clear the logs from the device in order for the device to function again. To do so, you may connect your device to TCMSv3 or Ingress, then download the logs. Once you've downloaded them, go to Data Audit List and check whether got all the raw data (refer here http://prntscr.com/pdxtun). If yes, you may download the logs again but this time you need to tick on the 'Remove transaction log after download' option (refer here http://prntscr.com/pdxu6f).
Please send email to email@example.com should you require further clarification on above issue as our team can assist you further.
Thanks & Best Regards.
Thanks for taking the time to discuss this, I feel strongly about it and love learning more on this topic. If possible, as you gain expertise, would you mind updating your blog with extra information? It is extremely helpful for me. track a cell phoneReplyDelete