How to Integrate Turnstile with Timetec device on Timetec Access

Thursday, July 22, 2021 TimeTec 0 Comments



Introduction
A turnstile is a form of gate that provides access to an individual at a time. It can also enforce one-way traffic for the community and restrict passage to only authorized individuals. For example, this setup is suitable for the lobby of an office building. With this setting in place, it will allow access to authorized individuals only; while at the same time preventing strangers from tailgating into the premises. Following the setup, users can use TimeTec Access to view the data from any place by computers or smartphones.

TimeTec Devices
1. There are two types of devices that you can use, which are:
    Fingertec Biometric Device(Door Access) - Face ID 5/TD , Q2i , or R3
2. IoT Controller - BLE-2


Process
1. Set Up and Wiring Diagram for Biometric Device

    a. Wiring diagram between FingerTec Biometric device and turnstile
 
             Connector pin at back of the device

    b. Activate device on TimeTec Access
    - For Face ID 5, refer to this link (not published yet)                     https://docs.google.com/document/d/1ND1R0AjXPlWA2Swgus2QB8eeLwBGDQM9a7ktOvpdYCY/edit?usp=sharing
    - For FingerTec device, refer to this link

2. Set up and wiring diagram for IoT Controller
    a. Wiring diagram between IoT Controller and Turnstile
Connector pin of BLE-2 controller

    b. Activate BLE-2 controller on TimeTec Access, refer to this link.

3. Manage User and Access group on TimeTec Access
    -You may refer to this link for further details.

4. On the TimeTec Access homepage, you can monitor all employees' access records and print the report.


Note: If some of the screenshots or steps viewed here are different from the ones in the current system, this is due to our continuous effort to improve our system from time to time. Please notify us at info@timeteccloud.com, we will update it as soon as possible.



0 comments:

Have any questions or inquiries about FingerTec? Drop your input here.