Installing TCMS V2 Viewer For Windows 7

Friday, March 01, 2013 TimeTec 23 Comments

The Windows 7 operating system has a more complex computer security system compared to its predecessors Windows XP, reducing the risk of damage caused by viruses, spyware and other malware. With the new security features, there are more steps to configure before you can use the TCMS V2 Viewer. Below are the instructions and steps to assist you through the TCMS V2 Viewer configuration:


A) To add an Inbound Rule for TCMS V2 Viewer into the Windows Firewall.
B) To enable all the Internet Information Services (IIS) features.
C) To set the application pool to Classic .NET AppPool.
D) To enable the ASP.Net Impersonation.
E) To Allow Full Permission and Control For All Users
F) Install the TCMS V2 Viewer.
G) Check the computer’s IP Address.
H) Run the TCMS V2 Viewer.


A)To add an Inbound Rule for TCMS V2 Viewer into the Windows Firewall:

1. Go to Control Panel and select Windows Firewall.



2. At Windows Firewall, click on Advanced settings.






3. Click on Inbound Rules and click New Rule at the Actions tab.



4. At the Rule Type, select Port and click Next.


5. Specify the local ports for TCP and UDP. Set the port value as 80 for both TCP and UDP.




6. At the next page, select Allow the connection and click Next.




7. Please tick on the checkboxes for Domain, Private, and Public. After that, click Next.





8. Insert the Name as TCMS V2 Viewer and click Finish.


B)To enable all the Internet Information Services (IIS) features
1.Go to Control Panel and select Programs and Features.
2.Click on Turn Windows features on or off.


3.Look for the folder Internet Information Services and tick on the checkbox. Make sure that you ticked all the subfolders inside the Internet Information Services option.

4.Click OK to proceed to installation.


C)To set the application pool to Classic .NET AppPool.
1.Go to Control Panel and select Administrative Tools.
2.Double click the Internet Information Services (IIS) Manager.
3.At the Connections panel on the left, click Sites > Default Web Site > right click TCMSv2Viewer > Manage Application > Advance Settings.





4.Change the Application Pool to Classic .NET AppPool and click OK.


5.At the Connections panel on the left, click Default Web Site, go to the Actions panel on the left and click Restart.



D)To enable the ASP.NET Impersonation.

1.Go to Control Panel and select Administrative Tools.
2.Double click the Internet Information Services (IIS) Manager



3.At the Connections panel on the left, click Sites > Default Web Site > double click on Authentications.



4.Change the ASP.NET Impersonation to Enabled.



E)To Allow Full Permission and Control For All Users

1.Go to C:\Program Files \FingerTec Worldwide
2.Right click at the TCMSv2 folder, and select Properties.



3.Click on the Security Tab and click Edit.




4.Click Add to add new Users or Groups.




5.At the Enter the object names to select columns, insert the name as "Everyone". Click OK to proceed.



6.Click on the "Everyone" group and tick the Full control checkbox at the Allow column.

7.Click Apply and OK to exit.


F)Install the TCMS V2 Viewer

1.You can download the TCMS V2 Viewer Software at: http://www.fingertec.com/download.php?name=tcmsv2viewer

2.Extract the downloaded file and double click on the installer to prompt the installation.









G)To Check Your Computer’s IP Address




1.Go to Control Panel and select Network and Sharing Center.

2.Click Change adapter settings and the window will display all your LAN and WiFi connection adapters.




3.Right click at your network adapter and select Status.




4.At the Status window, click Details.




5.Your computer’s IP Address will be displayed.


H)To Run The TCMS V2 Viewer



1.Start up an Internet Browser and insert the following address: http://(your computer’s IP Address)/tcmsv2viewer
For example please refer to the above screenshot.




2.The TCMS V2 Viewer will prompt you to enter the FingerTec TCMS V2 installation folder path. If you did not change the installation path while installing the TCMS V2 software, just click Submit to proceed.



3.The next screen will require you to log in to the TCMS V2 Viewer. Insert your user ID and password as per state in the TCMS V2 software to log into the TCMS V2 Viewer.




Initiated & Written by: Vincent

23 comments:

  1. To set the application pool to Classic .NET AppPool. I am not seeing TCMSv2Viewer listed

    ReplyDelete
    Replies
    1. Hi Dwight Alexander

      You can refer picture 9-11 to set the application pool to Classic .NET AppPool.

      1.Go to Control Panel and select Administrative Tools.
      2.Double click the Internet Information Services (IIS) Manager.
      3.At the Connections panel on the left, click Sites > Default Web Site > right click TCMSv2Viewer > Manage Application > Advance Settings.

      Delete
    2. To set the application pool to Classic .NET AppPool. I am not seeing TCMSv2Viewer listed

      Delete
    3. Hi Samidgsd samisdghs,

      Please run back this step > add an Inbound Rule for TCMS V2 Viewer into the Windows Firewall.

      Delete
    4. Hi Samidgsd samisdghs,

      Regarding to the problem, can you provide us the screen shoot picture and sent to support@fingertec.com. So we can analyze the problem and advice you the next solution.

      Delete
  2. Is the tcms viewer in the DVD software or i have to download from internet.
    Also what is the subscription for timetec software meant for?

    Wasiu

    ReplyDelete
    Replies
    1. You can download the TCMSv2 viewer setup at
      http://www.fingertec.com/download.php?name=tcmsv2viewer

      Refer http://www.timeteccloud.com/pricing for more detail about TimeTec Cloud package.

      Delete
  3. I did all the steps, but I have error on web browser "The 'VFPOLEDB.1' provider is not registered on the local machine".
    how I solve this error please?
    I am waiting reply.

    ReplyDelete
    Replies
    1. Dear Mohannad Altayyeb,

      You can follow the step below for the VFPOLEDB.1 error.

      1. In the IIS Manager, open up the list of Application Pools and select the pool for your application > Right-click and select "Advanced Settings" > Set "Enable 32-bit applications" to "True", then Okay the dialog > You then have to restart the Application Pool for the change to take effect.

      2. In the IIS Manager, create an Application Pool and set that Application Pool to run in 32-bit mode > Then assign the TCMSv2 Viewer using 32-bit mode to run in that 32-bit Application Pool.

      3. If you are using x64 OS, follow the step below.

      If you are going to use WSP on 64-bit version of Windows and manage 32-bit applications at the same time (e.g. mail server) you need to switch ASP.NET 2.0 in IIS to 32-bit mode.

      First of all using adsutil.vbs utility change Enable32BitAppOnWin64 setting in IIS metabase. adsutil.vbs script is usually located in c:\Inetpub\AdminScripts folder, so you should perform CD command first:

      Start -> Run... -> cmd -> [ENTER]
      C> cd c:\Inetpub\AdminScripts
      then run the following command to enable 32-bit IIS ISAPI module:

      cscript.exe adsutil.vbs set W3SVC/AppPools/Enable32BitAppOnWin64 "1"
      Then update ASP.NET 2.0 ISAPI registrations in IIS metabase:

      C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\aspnet_regiis.exe -i
      Make sure that the status of ASP.NET version 2.0.50727 (32-bit) is set to Allowed in the Web service extension list in Internet Information Services Manager.

      Delete
    2. Dear Mohamad Yusri,
      thank you for reply.
      i am trying to run on cmd :
      cscript.exe adsutil.vbs set W3SVC/AppPools/Enable32BitAppOnWin64 "1"
      its show as below:
      Microsoft (R) Windows Script Host Version 5.8
      Copyright (C) Microsoft Corporation. All rights reserved.

      Permission denied
      ErrNumber: 70 (0x46)
      Error Trying To Get the Object: W3SVC/AppPools

      so, how i can solve this issue?
      thank you again

      Delete
  4. please help,
    I have this message when I make login "Cannot open file c:\program files (x86)\fingertec worldwide\tcmsv2\sys.dbf. "
    so what is the solution?
    please reply

    ReplyDelete
    Replies
    1. Hi Mohannad Altayyeb

      Good day to you

      Regarding your error message, please refer to the following link's scenario 2 for a solution: http://www.fingertec.com/newsletter/Nov2010/TIPS-02.html

      Delete
  5. please any help, I am waiting programmer to fix our problem through fingertec team viewer as MR. Faizhuizhan said.
    please let us start our session because our payroll cycle on 20th.

    please let us start

    ReplyDelete
    Replies
    1. Dear Mohannad Altayyeb,

      I'm already teamviewer your PC.

      Currently we already solved your issue on FTDP and TCMSv2 software.

      Any further inquiry, you can directly email to support@fingertec.com

      Delete
  6. Dear Support,

    How can i reset TCMS V2 viewer user password..

    Thanks
    srinivas@nesma.com

    ReplyDelete
  7. where can i get tcms v2 viewer software? i already lost software cd. :(

    ReplyDelete
    Replies
    1. Hi,

      You can download TCMS v2 viewer from this link https://s3.amazonaws.com/files.fingertec.com/Sulaiman+Tools/Tools/TCMSv2%2BViewer%2BSetup.exe

      Delete
  8. This comment has been removed by the author.

    ReplyDelete
  9. hello , done it , but user ID and password , how can check them?? its not working pls help,
    is it possible to create new User ID and password?

    ReplyDelete
    Replies
    1. Hi Sir,

      Good day.

      With regards to your query, the user ID and password are based on the user that you registered in your TCMSv2 software. It located under device > employee management. You can use that info to login to the TCMSv2 viewer.

      Thanks and best regards,
      Tengku Sulaiman

      Delete

Have any questions or inquiries about FingerTec? Drop your input here.