Modifying Setup from Master-Master to Master-Slave

Monday, January 21, 2013 TimeTec 2 Comments


Before FingerTec Worldwide introduced Slave devices that could pair with Master devices, 2 master devices were used and modified to act as a Master-Slave setup for door access solution. Due to the distinct requirements by certain customers, the Master-Master setup is still widely used, most noticeably with the H2i, which is very popular due to its aesthetic quality. Its sophisticated design can cater to almost any style of office and home interiors.To modify the setup, please follow the instructions below:
  1. Download the FingerTec Terminal Function Tools here
  2. Upon download, start up the FingerTec Terminal Function Tool and connect to the terminal. Change the Wiegand Output to UserID and the AdapTec Plus to OFF.
  1. You will need to perform the above steps for both terminals.
  2. After that, download the FingerTec Master Slave Tools here(http://www.fingertec.com/download/FTMasterSlave.zip)
  3. For the Master terminal, update the tools as Master.
  1. For the Slave terminal, select Slave before you update it. 
  1. And now you’re done!


Initiated by Aidid, Written by Vincent

2 comments:

  1. i want to install two terminals side by side, in-view of making one stand as a backup to the other in case of technical issues. Do i need the master-slave software and the terminal function tool to get this done? Reply ASAP

    ReplyDelete
  2. j´ai oublie le mot de passe comment je dois faire pour le supprimer
    merci

    ReplyDelete

Have any questions or inquiries about FingerTec? Drop your input here.