UPLOAD USER PHOTOS INTO FINGERTEC DEVICES USING THIS SIMPLE TOOL!

Tuesday, December 22, 2015 TimeTec 7 Comments


Introduction

The latest version of TA100C and AC100C devices are equipped with the new Core Board version known as FMM 100, replacing the FEM510. The new coreboard is loaded with 800MHz microprocessor, 128MB RAM and 256MB flash memory.

With the new coreboard, you can experience the newly designed menu icons and faster data processing.

However, due to the fact that FEM510 and FMM100 models are running on different platforms, uploading user photos into FMM100 model devices cannot be done directly from our bundled software.


Benefits

Having a photo identification during fingerprint verification will further validate that the machine is capturing the correct user.

This tool will allow administrators to upload multiple user photos at the same time, without requiring any use of software.


Process

To upload user photos into FMM100 devices, please follow the steps below:


Step 1:

Make sure the device is connected to a PC. You can test the connection by pinging the device’s IP address, and connect it to Device Info tool (Refer : http://www.fingertectips.com/2014/01/how-to-use-fingertec-device-info-tool.html)

 
Step 2:

Download the “FT User Photo” tool from this link here.


Step 3:

Prepare the user photo appropriately according to the specs.
-          The resolution of the photo must be 320x210px , and the size must not be more than  
 30KB.
-          File type must be in JPEG format (.jpg)
-          Rename the user photos the same as the user IDs (for example user ID is 900, the photo  must be renamed as 900.jpg)
 

Step 4:

Copy all user photos and paste them in the “FT User Photo” folder (User photo must in the same folder with the FTUserPhoto tool)

 
 

Step 5
-          Turn OFF your PC’s Wifi,Firewall and Antivirus  
-          Run the FTUserPhoto tool
-          Insert device IP address (Tool will show the device information once connected)

 

Step 6:
-          Tick User Photo (box 1)
-          Then click the button (box 2) and Select user photos.

 
 
 
 

Step 7:

Click update button

Step 8:
After successfully updating those photos, you will be able to see the photo during verification process. Refer the picture below.
BEFORE
 
 
AFTER


 
 

7 comments:

  1. Unknown24 April 2016 at 23:07

    the application not run in my system.. i had followed the steps.

    ReplyDelete
    Replies
    1. Faizshuizhan25 April 2016 at 02:01

      Hi Francis Neri

      Please provide us the team viewer id and password so that I can check this issue in detail.

      You can download our FingerTec Teamviewer software at:
      http://www.fingertec.com/download/FT-RemoteDesktopSupport.zip

      Appreciate your feedback.

      Delete
  2. shaffipeace8 March 2017 at 19:58

    i can upload photo but finally device disconnect and reboot dose not work photos

    ReplyDelete
    Replies
    1. Yusri8 March 2017 at 20:18

      Hi Sir,

      Good day to you.

      We will reply your inquiry directly to this email reference number [ ref:_00D20917b._500D01OVPqN:ref ]

      Delete
  3. maftah garrab4 July 2021 at 19:43

    can i upload image to fingertec ta500

    ReplyDelete
    Replies
    1. Azril4 July 2021 at 19:46

      Dear Sir,

      Good day to you.

      In regards to your inquiry, TA500 does not support user photo. Sorry for any inconvenience.

      Delete
  4. juliee7 February 2022 at 21:33


    Since you have a heap of photos before you, what's the initial phase in getting sorted out them? All things considered, Clipping Path Service

    ReplyDelete

Have any questions or inquiries about FingerTec? Drop your input here.

Subscribe to: Post Comments (Atom)