OFIS Scanner for Fingerprint Template Registration and Time Attendance Device for Clocking Verification (OFIS TA) in TCMS v3/Ingress

Friday, June 21, 2019 TimeTec 3 Comments



Introduction
With OFIS scanner, users can perform fingerprint template registration in TCMS v3 / Ingress or use the OFIS scanner as a Time Attendance Device for verification (OFIS TA). The following will explain the steps and procedure to either use the OFIS scanner device as fingerprint template registrations or as a Time Attendance Device (OFIS TA).

First of all, download and Install OFIS Scanner Driver and Ofis Client Driver from the below links:
Important Note: During the installation of the driver, please make sure that you right click and run as administrator.

Once finished, please restart your PC and after the restart, you need to plug in the OFIS scanner until you hear a short "Beep" sound from the scanner, as a sign of successful activation.

Fingerprint Template Registration in TCMS V3 / Ingress
After you have plugged in the OFIS scanner, you can register the fingerprint template of the user in TCMS V3 or Ingress without adding the OFIS scanner in the Device Module. Go to Users Module and select Registration.

Select the User ID, Fingerprint algorithm and finger to be registered. Click Save.



Time Attendance Device for Clocking Verification (OFIS TA)
If you want to use the OFIS scanner as a verification device for the user, you have to add and activate the device in the Device module. Once the OFIS scanner has been successfully added and activated as OFIS TA, the device will act as a Time Attendance device for verification of the users.

Go to Monitoring Module> Click OFIS TA> and if the verification is successful, the data will be recorded as a clocking data for users that are verified. Single "Beep" sound from the scanner remarks the user fingerprint is able to be verified and double "Beep" sound from the scanner notifies that the user has failed to verify.


You may check this user clocking data is already saved in the data audit list as the clocking data of the user.

Note: If any of the screenshots or steps in this manual are different from the current system, it is due to our continuous effort to improve our system from time to time. Please notify us at info@timeteccloud.com. We will update it as soon as possible.





3 comments:

Have any questions or inquiries about FingerTec? Drop your input here.