Resolving “Required Active X is not registered properly or is outdated” Error in TCMS V2

Thursday, January 28, 2016 TimeTec 4 Comments



Introduction
Using the TCMS V2 on a PC that is running on Windows Vista, Windows 7, Windows 8, and Windows 10, can occasionally cause some glitches. Due to the extra security features that are built into the newer operating systems, an error message will pop up regularly when you launch TCMS V2 software. This is because the program files and system registry files on these Operating System (OS) are protected, and running the TCMS V2 requires access to these protected files. To prevent the prompting of the error messages and to ensure that the TCMS V2 is running smoothly on your OS, there are a few steps that need to be taken.




Benefits
By performing these steps, users will be able to launch TCMS V2 software without encountering the “Required Active X is not registered properly or is outdated” error message.


Process
1)    Close TCMS V2 software
2)    Go to TCMSv2 folder ( Local Disk C > Program Files (x86) > Fingertec Worldwide > TCMSv2
3)    Run Vistareg.exe as Administrator



 4)    Once done, return to your desktop, and right-click at TCMS V2 icon, then select “Properties”.

5)    Go to “Compatibility” tab, and click on “Change settings for all users”.

6)    Check the “Run this program as an administrator” option, then click “Apply” and “OK”, and the problem will be out of your site.

4 comments:

  1. no it did not work out still same error showing, please advice further trouble shoot, thanks

    ReplyDelete
    Replies
    1. Hi Mr Prem,

      Good day to you. Kindly inform us, if you have performed the software update before this error occurred. IF you have updated the software from older version (v2.2.026) and below to v2.2.027 using the "New Release" button, you will face this error message. To resolve your issue, please uninstall and re-install TCMS v2.2.027 in your PC, by using this installer:

      http://www.fingertec.com/download/FingerTecTCMSv2Setup.zip

      Please note that you must NOT delete the TCMSv2 folder in your local drive, to avoid missing data. As long as the TCMSv2 folder remains in your local drive, your database will remain.

      Thanks.

      Delete
  2. Reinstall works for my pc. Thx

    ReplyDelete
  3. I tried to run with administrator after rebooting Pc. It is working fine.

    ReplyDelete

Have any questions or inquiries about FingerTec? Drop your input here.