Installing The TA300 Driver

Tuesday, March 26, 2013 TimeTec 101 Comments


The TA300 device can be described as the definition of “mobility”, as it is not only wireless in nature, it is also portable. It is simple to use as it requires no installation, no power supply, and no cables of any sort. Communication with this device is done purely through the simple use of a USB connector. Normally the computer will detect the TA300 device once it is plugged in with the USB cable. If the computer does not detect the TA300 device automatically, then you will have to install the TA300 driver manually.
The first thing you need to do is unplug the USB cable of the TA300 device from the computer. Then install the USB client driver. Please refer to the instructions below to install the USB client driver.

1-     Download either USB Client x86 (for Windows 32-bit platform) or USB Client x64 (for Windows 64-bit platform) for installation.

2-     To install the USB client driver:
i-               Right click at the .exe file and select Run as administrator.



ii-              Click Next.


iii-            Click Install.


iv-             Click OK and Finish.



3-     Plug in the USB client to the PC and it will install the device driver automatically.


4-     Right-click on Computer and select Manage.


5-     The TA300 device will be detected under Portable Devices in Device Manager


6-    Finally, perform the terminal activation in the TCMS V2 software. 


Initiated and written by: Zul

101 comments:

  1. Hi Sir,

    Please arrange team viewer session for us to do the checking remotely.

    You can refer at http://www.fingertec.com/teamviewer/FT_teamviewer.html for more details on team viewer.

    Kindly send the team viewer ID to us at support@fingertec.com when you are ready.

    ReplyDelete
  2. The download Links doesnt work, they appear as blank page.

    ReplyDelete
    Replies
    1. Hi Sir,

      You can download the USB Client x86 (for Windows 32-bit platform) driver at http://www.fingertec.com/download/USBClientx86.zip and download the USBClient x64 (for Windows 64-bit platform) driver at http://www.mediafire.com/?d6wnn3br58fsbkc

      Delete
  3. hai,we need to reinstal tcmsv2 for fingertec ta300,but we lost the product key
    SMKA LIMAUAN
    mohdshahrizanmatjali@gmail.com
    serial : 3105003

    ReplyDelete
  4. Hi Mohd Shahrizan, You can refer below for your device's Product key and Activation code:

    Serial No. Product Key Activation Code
    3105003 AT6V-T2YB-CUQD C72MAVRG

    ReplyDelete
  5. Hello Sir, we need to reinstall tcmsv2 for fingertec TA300, but we cant find the product key
    AfriHUB Nigeria
    amcentjohn@gmail.com
    serial : 3406847

    ReplyDelete
    Replies
    1. Hello John,

      Kindly check your email for the TCMSv2 Product Key and Activation Code. Best Regards.

      Delete
  6. Hi Sir, i had reinstalled the software due to some mistaken delete off the program. i need the product key and activation code.
    My email is rickyleow@hotmail.com
    model : TA300
    serial ; 3408773

    ReplyDelete
    Replies
    1. Hi Sir,

      I already send the Product Key and Activation code to your email. Best Regards

      Delete
  7. Hi. I was unable to install the driver as the message "The wizard was interrupted before USB client x64 could be completely installed." Please advise.

    ReplyDelete
    Replies
    1. Hello Mr Ariff,

      Good day.
      Please kind unplug the terminal from the PC and re-install the driver again. Once done, please kindly restart the PC and plug the terminal back. If you are using Windows 8, please kindly follow the steps at the link below.

      http://www.fingertectips.com/2012/12/how-to-install-ofis-scanner-in-windows-8.html

      If issue persist, please kindly email us at support@fingertec.com so we can assist you further.

      Delete
  8. Hi Sir,
    i had reinstalled the software due to Server Hardware Failure. i need the product key and activation code.
    My email is jelbugs@gmail.com
    model : TA300
    serial ; 3408350

    Looking Forward for your heartfully respond...

    ReplyDelete
    Replies
    1. Hi Jelson,

      Good day,

      Please check your email:jelbugs@gmail.com. Let me know if you not received the Activation Key.

      Delete
  9. Hi can you send me the product key and activation code fot
    TA300 : 3402806
    TA300 : 3405173
    Please send to myla@towerclinic.com
    Thanks

    ReplyDelete
    Replies
    1. Hi Myla,

      Good day to you,

      As per requested, kindly check your email for the TCMSv2 product key and activation code.

      Thank you and have a nice day.

      Delete
  10. Hi Sir,

    I reinstallaed TCMSv2 but can't find the key. Could you help me get it?
    TA300 : 3407871
    eric.nsiku@crs.org

    ReplyDelete
    Replies
    1. Hi Eric,

      Good day to you,

      As per requested, kindly check your email for the TCMSv2 product key and activation code.

      Thank you and have a nice day.

      Delete
  11. Hi can you send me the product key and activation code fot
    TA300 : 3402806
    TA300 : 3405173
    Please send to mrjebond1718@gmail.com
    Thanks

    ReplyDelete
    Replies
    1. Hi can you send me the product key and activation code fot
      TA300 : 3402384
      TA300 : 3402385
      Please send to mrjebond1718@gmail.com
      Please ignore earlier msg. TQ

      Delete
    2. Good day to you,

      Hi Sir,

      As per requested, kindly check your email for the TCMSv2 product key and activation code.

      Thank you and have a nice day.

      Delete
  12. Hi can you send me the product key and activation code for
    TA300 : 3403454
    Please send to my e-mail: jean.gonzalez17@upr.edu

    ReplyDelete
    Replies
    1. Hi Sir,

      If you need the TCMSv2, TCMSv3 or Ingress product key and activation code, you can always retrieve the key at http://user.fingertec.com/retrieve_key_user.php

      Our system will automatically generate the product key and activation code. If there is any other information required, do let me know so I may assist you accordingly.

      Delete
  13. I am having trouble with the TA300

    ReplyDelete
    Replies
    1. Hello Sir,

      Good day to you.

      Please provide more details on your problem with TA300

      At the same time, You can email to your local reseller (Fingertec USA : support@fingertecusa.com), so they can assist you at the soonest

      Delete
  14. Hello, I need to reinstall a TA300 on another system. Where can i retrieve the serial number in order to request for a Product key.

    thanks

    ReplyDelete
    Replies
    1. Hi Sir,


      With regards to your query, you can check your device serial number from the software ( Device > Fingertec terminal ). You also can check it from the device itself by refer to the device info/system info menu from the terminal.

      Delete
  15. This comment has been removed by the author.

    ReplyDelete
  16. Hi Sir,
    can you send me the product key and activation code for TA300 - 3407113

    fajaa_adm@yahoo.com

    Tq

    ReplyDelete
    Replies
    1. Hi Fajaa,

      Good day.

      Please check your email for the details that you request.
      I already reply it on your email.

      Best regards,
      Tengku Sulaiman.

      Delete
  17. Hello, I have been trying to activate my TA300 terminal with no luck, everything seems in place but the activate terminal button on the setup window is disabled. I need help asap! Thanks

    ReplyDelete
    Replies
    1. Hello Sair,

      Good day to you.

      With regards to your inquiry, kindly untick on disabled button for TA300 and continue to activate TA300.Before that, please make sure your communication type is set correctly as USB Client so that you will have no problem activating your terminal.

      If this solution did not able to solve your problem, kindly drop us an email at support@fingertec.com so that our support team can assist you accordingly.

      Best regards,
      Athirah Liyana

      Delete
  18. Hello Sir, i lost my device activation code, can u provide it to me?
    e-mail: bcsjee373@hotmail.com
    serial : 3407069
    product key : LNGF-ENXF-C7JJ

    ReplyDelete
    Replies
    1. Hi Sir,

      Good day.

      Based on your product key, it show that key for TCMSv3 software and TCMSv3 don't use activation key to activate the device in it. It only use the product key. Only TCMSv2 use activation key. If you are looking for TCMSv2 key, you can generate it here:
      http://user.fingertec.com/retrieve_key_user.php

      Thanks and best regards,
      Tengku Sulaiman

      Delete
  19. Hi Sir,
    Need your help, 1 of our staff have lost cd and key code. Can I get the software from you? Serial No. : 3405010 ; email : mohdnur2876@yahoo.com

    ReplyDelete
    Replies
    1. Sorry. The model is TA300

      Delete
    2. Hi Sir,

      Good day to you.

      You may check your email for the details that you had requested. Thank you.

      Best regards,
      Husna Juani

      Delete
  20. Dear Sir:
    I lost the device activation code, can you please help:
    TA300 : 3405991
    TA300 : 3409998
    email : LSPAMK@hotmail.com

    Thank you very much

    ReplyDelete
    Replies
    1. Hello Sir,

      Good day to you.

      Please refer below details for device activation code :

      TA300 : 3405991 - product key = JYV9-GCM8-93GU -activation code = JGF4S4C9
      TA300 : 3409998 - product key = B7DX-5HMR-A4UW -activation code = XBGCBW4D

      Please do not hesitate to contact us back should you have other query at support@fingertec.com so that we can assist you further.

      Regards,
      Athirah Liyana Mohmad

      Delete
  21. Hi, we need to reinstall the software but lost the activation code, please help...
    TA 300 Serial no : 3400917
    Email: admin@taipingsentralmall.com

    Thanks a lot!

    ReplyDelete
    Replies
    1. Hi Pauline,

      Please check your email because I already send you the details to your email:
      admin@taipingsentralmall.com

      Regards,
      Tengku Sulaiman

      Delete
  22. Dear Sir:
    I lost the device activation code, can you please help:
    TA200 : 3200272
    email : visam007@gmail.com

    Thank you very much

    ReplyDelete
  23. Dear Sir,

    Good day to you,

    We already sent the TCMSv2 license key to your respective email. Thank you very much .

    ReplyDelete
  24. Dear Sir:
    I lost the device activation code, can you please help:
    TA300 : 3409991
    email : srihoautoparts@gmail.com

    Thank you very much

    ReplyDelete
    Replies
    1. Hello Sir,

      Good day to you

      Kindly check your mailbox as the reply already sent.

      Regards,
      Athirah

      Delete
  25. Hello We are need to instal our TA300 in a new computer because the one we had crashed. I dont have the product key or the fingertech SW. the serial number is 3411406 and my email is omar@ranchobaiguate.com

    thank you,

    Omar

    ReplyDelete
    Replies
    1. Dear Mr Omar,

      Good day to you

      We have already sent an email to you, kindly check your mail box.

      Regards,
      Husna

      Delete
  26. Dear Sir:
    I lost the device activation code/ key , can you please help:
    TA 300 : 3408241
    email : mozk77@yahoo.com

    Thank you very much

    ReplyDelete
  27. hello sir can u please help to get activation key for TA500 serial no.7406500

    ReplyDelete
    Replies
    1. Hello Sir,

      Kindly refer below for TCMSv2 license key:

      Serial No : 7406500
      Product Key : AK9V-Q5WK-GSWK
      Activation Code : B2QMUU7Y

      Delete
  28. Dear Sir,

    I lost the product key and activation code can you please help :

    TA 300 Serial No : 3405571
    Email Address : kumarvchelliah@gmail.com

    Thank you very much

    ReplyDelete
    Replies
    1. Hello Sir,

      Please be informed that the activation details has been sent to your mailbox.

      Delete
  29. Dear Sir,

    I lost the product key and activation code can you please help :

    TA 300 Serial No : 3104246
    Email Address : ISMAEIL.ALI@gmail.com

    Thank you very much

    ReplyDelete
    Replies
    1. Hello Sir,

      Please note that our team has sent the activation details via your email address.

      Delete
  30. hi again

    sorry i gave you a wrong serial no
    the correct serial no is 3404245
    same email please ismaeil.ali@gmail.com
    thanks and sorry again

    ReplyDelete
    Replies
    1. Hi Sir,

      Good day to you,

      Please be informed that the activation details has been sent to your mailbox.

      Thanks & Best Regards,
      Nursyafawani Kasram binti Mohd Hisham

      Delete
  31. Hi Sir,

    How i want to restore the time of thumbprint dat.. because all the data was dissepear

    ReplyDelete
    Replies
    1. Dear Sir / Ma'am,

      Good day to you,

      Referring to your inquiry, may I know are you referring to the data in your device or in your software?

      If the data are missing from your device, there's no way to retrieve them unless you have downloaded them into USB pendrive or any of FingerTec software.

      Please send email to support@fingertec.com regarding above issue as our team can assist you further.

      Thanks & Best Regards,
      Nursyafawani Kasram binti Mohd Hisham

      Delete
  32. Hi Sir,

    trying to setup TA300 on Win10 x64. Tried the driver in the link provided above, but unable to complete install. Tried several times; under administrator, using win7 compatibility too. please advise.

    ReplyDelete
    Replies
    1. Hello Sir,

      Good day. May I know what do you mean by unable to complete install? Is there any message shows in your workstation or not? The driver is required for your workstation to recognize the device when you are plug in them via usb. Should be there is some sound that notified a device has been already connected to your workstation. If there is no sound or no notification that means you need to check with the driver installation or the usb hub at your workstation itself.

      Delete
    2. HI Sir, it prompts ' the wizard was interrupted before USB client x64 could be completely installed...." and the window only has the 'finish' button option. Is there another way to get the drivers? Perhaps in a .zip file instead?

      Delete
    3. Hello Sir,

      You may find the link for the installer below : http://www.mediafire.com/download/d6wnn3br58fsbkc/USB_Client_x64.zip

      Please make sure to disable antivirus and firewall and run the installer as an administrator.

      After completed, please reboot your pc.

      Delete
  33. Dear Sir,

    I lost the product key and activation code can you please help :

    TA 300 Serial No : 3402870
    My Email Address : casacarpa@gmail.com

    Thank you very much for your help.

    ReplyDelete
    Replies
    1. Hello Sir

      Kindly share with us what software that you are using (TCMSv2, TCMSv3 or Ingress) before we can generate the correct license key for you.

      Best Regards.

      Delete
  34. Hi

    Thanks for answering

    I explain my situation, I am trying to put my TA300 into operation in my company but at the time of installing the equipment I lost the CDs and consequently the activation code of it.

    I want to install the TA300 on a laptod with win10 64bit. I need your help to send a link to download the TA300 program that you recommend for the control of entry and exit of my staff in my company as well as its activation code.

    thanks for your help

    ReplyDelete
    Replies
    1. Hello Sir,

      For update, I have send to you an email regarding to your query.

      Best Regards

      Delete
  35. Dear Sir,

    I lost the TA300 product key and activation code can you please help :

    TA 300 Serial No : 3409243
    Email Address : hr@kassinternational.com

    Thank you very much

    ReplyDelete
  36. Dear Sir,

    Is it possible to restore the TA300 punch in and out data from the terminal as my comp was reset upon changes of hardware?

    Please do email me at clarkwong93@gmail.com for the steps of restore.

    Thank you very much

    ReplyDelete
    Replies
    1. Dear Sir,

      Good day to you,

      May we know did you reformat your PC? If yes, you may reinstall the software then re-download the user and transaction logs again into the respective software.

      Fingertec Software - you may download the software you had been using before
      https://www.fingertec.com/software/

      Remark: You can only download user and logs that still existed in the device which means any deleted logs/user can not be retrieved.

      Delete
  37. Hi Sir, i had reinstalled the software due to some mistaken delete off the program. i need the product key and activation code.
    My email is merylle_vlain@yahoo.com.ph
    model : TA300
    serial ; 3410666

    ReplyDelete
    Replies
    1. Hello Vlain,

      Kindly refer to the following information for the device product key and activation code.

      Serial No : 3410666
      Product Key : CU8D-CFJ9-5PV4
      Activation Code : QET2FS9E

      Delete
  38. Hi,

    I lost the TA300 product key and activation code can you please help

    TA 300 Serial No : 3407246
    Email Address : hafizul@jalen.com.my

    Thank you very much

    ReplyDelete
    Replies
    1. Dear Mr Hafizul,

      Good day to you,

      You may refer below for the TCMSv2 license key

      SN:3407246
      Product Key: QRD4-5GSJ-RY99
      Act Key: 645KHY35

      Delete
  39. Hi Sir,
    Need your help, I lost my CD and keycode while moving office. Can I get the software from you? Model: TA300, Serial No. :3409158, email: cutfessy@gmail.com, meshratio@gmail.com.
    Thank you

    ReplyDelete
    Replies
    1. Also Product Key and Activation Key.
      Thank you

      Delete
    2. Dear Sir / Ma'am,

      Good day to you,

      You may download the TCMSv2 software from this link: https://www.fingertec.com/softwareupdate/software-tcmsv2_download_e.html

      The product key and activation code are as follows:
      Serial No: 3409158
      Product Key: TR4G-3YHU-T8M4
      Activation Code: 34YNTSCA

      Thanks & Best Regards

      Delete
  40. Hi,
    I lost the CD with the Activation. I need to re-install software for the TA300 Model. Serial Number: 3410061

    Can you please email me the information to: frontdesk@sympt.net

    ReplyDelete
    Replies
    1. Hello Sir,

      For update, I have send to you an email regarding to your query.

      Best Regards

      Delete
  41. Hi Sir, i had reinstalled the software due to some mistaken delete off the program. i need the product key and activation code,tq...
    My email is tengsiawhoui@yahoo.com
    model : TA300

    ReplyDelete
    Replies
    1. Hello Sir,

      Referring to your query, kindly update us the software that you have use or installed together with the device Serial Number before we can generate the Product Key for you.

      Best Regards.

      Delete
  42. I didn't utilize a driver with any level of recurrence until my second year of golf. In assessing the subject of how to pick a golf driver or the best golf driver, this is quite possibly the main variables. Taking a gander at senior golf players for a second, the best drivers for senior golf players are presumably those drivers that have high space. AUSTRALIAN FAKE ID

    ReplyDelete
  43. This comment has been removed by the author.

    ReplyDelete
  44. Hai , boleh email kan saya software , model TA300 . komputer lama dah corrupt dan CD indtaller pun dah hilang . macam mana nak install semula ? Email : nurulnadia910914@gmail.com

    ReplyDelete
    Replies
    1. Salam Cik Nurul,

      Untuk makluman, saya telah email kepada cik maklumat yang diperlukan untuk install semula software Fingertec. Harap maklum.

      Delete
  45. Thanks for an interesting blog. What else may I get that sort of info written in such a perfect approach? I have an undertaking that I am just now operating on, and I have been on the lookout for such info. taxi den haag naar schiphol

    ReplyDelete
  46. Hi Sir,
    Need your help, I lost my CD and keycode. Model: TA300, Serial No. :3411002, email:shlmaintenancegvh@yahoo.com
    Thank you

    ReplyDelete
    Replies
    1. Hello Sir

      Kindly check your email, regarding to your query. Best Regard.

      Delete
  47. Hi sir,
    Kindly can help to resend email for product key and activation key
    Model : TA300
    Serial no : 3411002
    Email : shlmaintenancegvh@yahoo.com

    Tq for your concern

    ReplyDelete
  48. this message appears
    ""the wizard was interrupted ......
    your system has not been modified to complete installation at another time please run setup again ""

    i am very sure that the system is win 10 64bit

    ReplyDelete
    Replies
    1. Hello and good day.

      Please kind unplug the terminal from the PC and re-install the driver again. Once done, please kindly restart the PC and plug the terminal back. This issue is more related to the process of your computer to recognize the terminal. Please also refer to the following link for some idea on this issue.

      http://www.fingertectips.com/2012/12/how-to-install-ofis-scanner-in-windows-8.html

      Delete
  49. Hi Ahmed

    i have already unplugged the device but the same message appears

    ReplyDelete
  50. My device is 3411144, My email is 1695north@gmail.com

    Can you please send me the product key. i have to reset the machine and start new

    ReplyDelete
  51. Hello
    i am trying to install the device but i dont have the product key and activation for the tcms v2.2.027 please send them
    E-mail : mahmoudsalamah2002@gmail.com
    and please arrange a team viewer session as i am unable to configure the device

    ReplyDelete
  52. I would like to say that this blog really convinced me to do it! Thanks, very good post. fake id

    ReplyDelete
  53. Hi sir,
    Kindly can help to resend email for product key and activation key

    Model : TA300
    Serial no : 3402229
    Email : dmosqueda@orbissolutionsinc.com

    ReplyDelete
  54. I am having problems connecting my device to my software. Can someone please help? It is not a new device or new software, it just decided to quit working today...

    ReplyDelete
  55. Good day sir, kindly provide an activation key for serial no. 3411606
    Im doing an offline set up

    ReplyDelete
  56. Hi Sir,
    Need your help, I lost my CD and activation keycode.
    Model: TA300, Serial No. :3411369
    KIndly email the activation code:
    definitepreference@gmail.com
    Thank you

    ReplyDelete
  57. Hi Sir,
    Need your help, I lost my CD and activation keycode.
    Model: TA300, Serial No. :3405874
    KIndly email the activation code:
    maisarahppdpekan@gmail.com
    Thank you

    ReplyDelete
  58. Dear Sir:
    I lost again the device activation code, can you please help:
    TA300 : 3409991
    email : srihoautoparts@gmail.com

    Thank you very much

    ReplyDelete

Have any questions or inquiries about FingerTec? Drop your input here.